| 1. | Test method for flatwise tension strength of sandwich constructions
夹层结构平拉强度试验方法 |
| 2. | Standard test method for tension strength of sew - through flange buttons
有眼镶边纽扣抗拉强度的标准试验方法 |
| 3. | Test method for flatwise tension strength of nonmetal sandwich constructions
非金属夹层结构平拉强度试验方法 |
| 4. | Laminated wood plastics . compreg determination of tension strength parallel to face grain
木质层积塑料.顺纹抗拉强度的测定 |
| 5. | Tension strength at break
破断强度 |
| 6. | A contrastive study of direct tensile strength and splitting tension strength of high performance concrete
高性能混凝土轴心抗拉强度与劈裂抗拉强度试验研究 |
| 7. | It have got a good tension strength , stable gnarl pitch , lower noise , small liberation , long life , excellent performance
该系列履带采用了国际先进的生产技术，抗拉强度大，节距稳定性能好，噪音低，震动小，寿命长，性能优越。 |
| 8. | The multifilament tension strength test was firstly applied to characterizing carbon fibers damage degree in cmcs during pip , which as an intractable problem was resolved successfully
本文首次应用复丝拉伸强度测试来表征pip工艺中碳纤维的损伤程度，较好地解决了陶瓷基复合材料中碳纤维损伤程度如何表征这一棘手的问题。 |
| 9. | The effect of y - zro2 powders preparation process , the compositions of the powders and the sintering process on the fracture toughness , the tension strength and the grinding - ratio was investigated by the use of mechanical tests
增韧效果取决于y - zro _ 2粉体中稳定剂的含量、粉体制备工艺及参数以及pcd及pcbn高压烧结工艺与参数。 |
| 10. | The whole tension strength of steel fiber reinforced self - stressing concrete is a combination of tension strength of matrix and the self - stress value ; the strain of knee point is defined to 500 10 ^ ( - 6 ) , and a formula for stress of knee point is suggested
钢纤维自应力混凝土抗拉强度为混凝土基体的抗拉强度与自应力值之和；曲线下降段拐点的应变定义为500 10 ^ ( - 6 ) ，并提出拐点应力计算公式。 |
